Thickness Planers

Product Details:

STANDARD EQUIPMENTS AND DEVICES : - Extruded anodized aluminium sliding table (dimensions 270 x 124 x 1600 mm) sliding on high precision hardened guideways? - Squaring frame (dimensions 960 x 600 mm) complete with:? - telescopic fence with 2 crosscut flip-over stops - eccentric clamp - swinging arm support - Saw unit for 315 mm maximum blade diameter with scoring blade (option) installed (blade not included) - Simultaneous surfacing tables opening, at 90?, towards the inside of the machine - Adjustable spindle moulder fence with micrometric adjustment complete with vertical and horizontal pressers - Integrated fence, for parallel cuts and surface planing STANDARD EQUIPMENTS AND DEVICES : - Surface planer tables with simultaneous opening - Dedicated surface planer fence (dimensions 1200 x 150 mm) - Thicknessing table lifting by means of 4 columns dust protected - Helicoidal thicknesser infeed roller - Sandblasted steel thicknesser outfeed roller - Pre-setting for mortiser - Mechanical readout (1/10 mm) for thicknessing table height. TECHNICAL FEATURES: PLANER - useful working width [mm] : 410 - cutter block diameter (mm)/n. standard knives : 95/4 - standard knives dimensions [mm] : 410 x 30 x 3 - max. stock removal [mm] : 5 - surfacing tables total length [mm] : 2200 - thicknessing table dimensions [mm] : 410 x 775 - feed speed on thicknesser [m/min] : 44536 - min. - max. working height on thicknesser [mm] : 3 - 240 - min. working length on thicknesser [mm] : 180 - Other technical features: - threephase motorse S6 : 5kW (6,6hp) 50Hz - exhaust outlets diameter [mm] : 120

Product Details:

STANDARD EQUIPMENTS - Helicoidal thicknesser infeed roller - Sandblasted steel thicknesser outfeed roller - Thicknessing table lifting by means of 4 columns dust protected - Digital readout (1/10 mm) for thicknessing table height - Security execution - minimax s 41es - Voltage 400 EU - Frequency 50 hz - "Xylent" spiralknife cutterblock with 3 series of knives - Xylent maintenance kit - Rubber-coated feed roller on thicknesser outfeed TECHNICAL DATA - Useful working width [mm]:410 - Cutter block diameter (mm)/n.standard knives:95/4 - Standard knives dimensions [mm]:410 x 30 x 3 - Max. stock removal [mm]:5 - Thicknessing table dimensions [mm]:410 x 775 - Feed speed on thicknesser [m/min]:6 /12 - Min. ÷ max. working height on thicknesser [mm]:3 ÷ 240 - Min. working length on thicknesser [mm]:180 OTHER TECHNICAL FEATURES: - Three-phase motors 5kW (6,6hp)50Hz - Exhaust outlets diameter [mm]:120

Product Details:

- Max. Working Width: 500mm - Max. Working Thickness: 180mm - Min. Working Thickness: 3mm - Max. Cutting Depth: 4mm - Min. Working Length: 250mm - Working Table Size: 540x902mm - Feed Speed: 6/8m/min - Spindle Speed: 6000rpm - Power: 6.25kw

Product Details:

FEATURES:- Thicknessing table with vertical moving by means of 4 steel screws
- 1st front roller in helicoidal steel- No. 1 rubber coated steel outfeed roller- Interchangeable feed rollers- Cutterblock and knife fitting gibs with technical specs. and instructions engraved on same, complete with knife-   setting  device-  Xylent spiralknife cutterblock with 3 series of knife-  Xylent maintenance kit-  10 spare inserts kit (15x15x2,5) for Xylent spindle- 7kW 50Hz motor power : [S6 -40%] 7kW 9,5 HP 50Hz - Service kit for use and maintenance
TECHNICAL DATA:- Working width [mm] : 630- Worktable dimension [mm] : 630x1000- Working height (min/max) [mm] : 3,5/300- Max. stock removal [mm] : 8- Minimum working length [mm] : 260- Minimum working width [mm] : 10- Cutterblock speed [rpm] : 4500- Cuterblock diameter [mm] : 120- No. 4 knives [mm] : 35x3x640- Feed speed [m/min] : 5-8-12-18- Exhaust outlet diameter [mm] : 150
SAFETY / PROTECTION:- Soundproof infeed and outfeed barriers- Emergency pushbutton on front machine side- Safety microswitch on protection hood- Padlockable main switch- Overload switch protection- Auxiliary low voltage circuit (110 volt)

Advantages:

• Interchangeable rollers: one machine for every requirement. Quik and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.

Specifications:

 

Additional Information:

• Minimum Order Quantity: 1 Piece
• Port of Dispatch: Mumbai Delhi Bangalore
• Delivery Time: 7-10 working days

Advantages:

• The best finish and effectiveness of the feeding of any material and in any working condition thanks to the pneumatic adjustment. The unique ability to differentially set the pressure on the infeed and outfeed rollers, allows to change at any time the pressure exerted on the work piece.
• Interchangeable rollers: one machine for every requirement. Quik and easy changeover of the rollers that allows the operator to configure the machine drive function in case of special requirements such as minimum removal of fine wood and/or batches where multiple pieces of different thicknesses are processed.
• Best finish at maximum speed with the electronic adjustment of the feed speed.
• Feeding rollers on connecting roads: perfect finish. The stopping of the work piece and the presence of notches on its surface are eliminated due to the movement system on all three rollers that allows their vertical displacement by rotation and the best linear feeding.

Specifications:

Additional Information:

• Minimum Order Quantity: 1 Piece
• Port of Dispatch: Mumbai Delhi Bangalore
• Delivery Time: 7-10 working days